Too Shy
Unregistered
|
posted 10/20/03 6:32:59 PM
I just replaced my ignition switch on my 76 vette, now I have no power in the wire running to the solenoid. The small guage wire connecting to the solenoid then routes to a connection with larger grade wire and clips together - I have no power all the way to the fuse panel on the engine side of the firewall - I routed wire from the + side battery post then to the small gauge wire connected to the solenoid and the car starts. Where does the large grade wire route to, I assume this needs replaced? Any help is appreciated.
|
